Series MJ-90 - Molded Elastomer

MJ-90 molded elastomer expansion joints are designed to handle vibration, misalignment and movement in smaller diameter piping systems. The union ends provide a simple means of disconnecting the piping to service equipment such as pumps.

MJ-90 molded elastomer expansion joints are designed to handle vibration, misalignment and movement in smaller diameter piping systems. The union ends provide a simple means of disconnecting the piping to service equipment such as pumps. The maximum angular movement of this joint is 45°.

 request quote
inside diameter a b c d weight elong compres trans angular
3/4" 1 1/2" 6 1/2" 4 3/4" 3/4" 2 Pound 13/16 3/4 13/16" 45 º 45
1" 2" 6 3/4" 4 3/4" 1" 3 Pound 13/16 3/4 13/16" 45 º 45
1 1/4" 2 1/4" 6 7/8" 4 3/4" 1 1/4" 3 Pound 13/16 3/4 13/16" 45 º 45
1 1/2" 3" 7 1/4" 4 3/4" 1 1/4" 4 Pound 13/16 3/4 13/16" 45 º 45
2" 3 3/4" 8 1/4" 5 3/4" 1 1/2" 6 Pound 13/16 3/4 13/16" 45 º 45
2 1/2" 4 1/2" 8 3/4" 5 1/2" 1 5/8" 9 Pound 13/16 3/4 13/16" 45 º 45

All EVR products are guaranteed for one full year against defects resulting from faulty workmanship or materials. If any such product is found to be defective by reason of faulty workmanship or materials, upon written notice and return of the product, the defective product will be replaced by us free of charge, including the shipping charges for the replacement product. Claims for labour costs and other expenses required to replace such defective product, or to repair damage resulting from the use thereof will not be allowed by us. Our liability is limited to the price paid for the defective product. EVR Products shall not be bound by any warranty other than the above set forth unless such warranty shall be in writing. This literature is published in good faith and is believed to be reliable, however, EVR Products does not represent and/or warrant in any manner the above information and suggestions contained in this brochure. Data presented is the result of laboratory tests and field experience.